Swimming pools are a great way to relax and unwind, but they do need repair from time to time. It is important to keep up with pool repairs so that your pool functions well for the long term and does not become damaged or cause a safety hazard. Here are five signs that your pool may need to be repaired.
Cracked or Broken Tiles
Cracked or broken tiles are a sign that the pool needs repair because they can cause water leakages and weaken and erode the soil surrounding the pool. These issues should be addressed immediately because they can also make it unsafe for swimmers. In addition, the grout around your pool can become discolored due to dirt or other debris that becomes lodged in it. In order to fix this, your pool will need to be drained and the electricity shut off so that a professional can inspect it.
If your pool has dirty water, it is most likely a sign that the filter is clogged or that the pump isn’t working properly. This can be a simple problem to fix, but it’s always better to leave these types of repairs to the professionals.
A pool is supposed to lose a few inches of water each week due to evaporation, but if it’s losing more than this or you notice wet areas around the pool, it could indicate that there’s a leak in the pipework or the filtration system. It’s important to contact a professional right away because this type of leak can cause permanent damage if left untreated.
It’s a shame to see a beautiful swimming pool that’s looking dull and outdated, but there is a way to give it new life. Whether it’s a few cosmetic upgrades or technology changes, your pool can be a lot more enjoyable for you and your family to use if it has been updated. The key is to find a professional who knows how to perform these upgrades so that you don’t end up with a pool that looks worse than before.
Broken Plaster
Your pool is a pretty big investment, so if it starts to look worn, you should make sure you have it repaired ASAP. Leaving these cracks untreated will only cause them to get worse and can lead to major leaks down the line.
Plaster is a common pool surface material, and it can be susceptible to damage from poor cleaning and maintenance habits, wildly swinging weather patterns and ground shifts. Even the best quality plaster mix will start to erode over time, especially in areas that receive a lot of sun.
If you notice a spot of broken plaster, taking care of it as soon as possible is important. A professional will be able to drain the pool and resurface the area, preventing it from becoming more damaged down the line.
Another sign that your pool needs repair is if the plaster is showing signs of staining. Excess minerals in the water cause this, and it can be very difficult to remove. A new plaster coating will help prevent this from happening in the future.
Small cracks and spots of delamination in your pool plaster can be fixed with patching materials like Patch-It. This waterproof cement is easy to apply and cures underwater, making it a great option for those who don’t want to drain the entire pool. Just be sure to use the proper safety precautions when working with chemicals, and always follow label instructions for draining your pool. Also, be sure to cover patches with a damp towel or an old bed sheet if you won’t be refilling the pool for a few hours (to keep them from drying out too quickly). This will also help the patch hold up longer until the pool is filled again.
Dirty Water
If your water is starting to look murky and dirty, this is usually a sign that there is an issue with your filtration system or that your chemicals are out of balance. These issues can cause algae to grow, and if not dealt with promptly, they can lead to a greenish or cloudy pool.
Depending on the issue, you may need to treat the water with chlorine or other chemicals to get it back in balance. You will also need to have the piping in your pool checked for possible blockages. It is best to call a professional to do this since they will be able to quickly diagnose the issue and make any necessary repairs.
Dirty Water in the Return Jets
If you notice that the water in your pool is murky or that there are dark spots, this could be a sign that the sand filter needs to be cleaned out or that the sand in your pool has gotten too small. These can be difficult to fix on your own and need to be done by a professional.
Dirty water in your pool can also be a sign that the pool pump is faulty. If your water is not properly filtered, it can lead to chemical buildup in the water and your equipment. If this is the case, it is best to have your pump looked at by a professional so that they can determine whether the sand filter needs to be changed or the pump itself needs to be replaced.
Low Water Level
Every pool needs regular maintenance and repairs to keep it in working condition. If a homeowner neglects to address necessary repairs, they will eventually run into long-term problems that can be expensive and difficult to fix. Knowing the signs that your swimming pool is in need of repair will help you to schedule a professional pool service to make the needed repairs.
Low water level is one of the most common symptoms that a pool needs repair. If you have to continually fill up the pool to keep it at a consistent level, this is a sign that there is a leak somewhere in the system. This could be in the piping that is taking water from the pool, or it may be in the cracks of the concrete or liner of the swimming pool.
Pools typically lose about an inch of water per week due to evaporation. If you notice that your pool is losing more than an inch of water a week, it is a good idea to get a professional pool service to come to take a look. They can determine where the leak is coming from and then repair it before it gets any worse.
A quick way to check for a pool leak is to use the bucket test. This involves filling up a bucket with your pool’s normal water level and then marking both the bucket and the pool. After 24 hours, compare the levels; if the pool is losing more water than the bucket, there is a leak somewhere in the system. It may be in the pump, in the liner, or in the plumbing underneath the deck.
Broken Lights
While it may seem tempting to save money and tackle pool repairs yourself, this is one job that is better left to a professional. Water and electricity are not a good mix, so having a professional handle the job ensures that everyone using the pool is safe. This is also a safer option than replacing a broken light with an electrical cord, which could cause further damage or injury to anyone nearby.
Another sign that your pool needs repair is if the interior surface is starting to crumble or crack. Whether it is due to a chemical imbalance or poor pool maintenance, this issue can easily lead to a major leak and even structural problems in your backyard. It is best to contact a pool expert immediately to ensure the issue doesn’t worsen over time.
In addition, if your water seems murky or dirty, it can be a sign that the chemicals in your pool are out of balance. This can lead to algae growth, which shows up in green or cloudy water and often leaves black or dark spots on equipment and hoses. It’s important to address this issue as soon as you notice it, as balancing the chemicals will be much easier if caught early on.
Another issue that can indicate the need for a swimming pool repair is if your water is frigid, which could be a sign that the heater is not working correctly or that there is a mechanical issue with the pump. A professional will be able to ask targeted questions to help find the source of the problem, which can save you the expense of replacing your entire filter system or redoing the liner, concrete, or fiberglass.
